E-Z S-500 Replacement Stretcher Strips (2 part)

The new Endurance Style E-Z S-Series Replacement Stretcher Strip is more durable and flexible than any of our previous generations of replacement strips. The 2 part design works with the S-500 stretcher. Use both of the 9" segments to stretch smaller size bars. Slide them out to the ends of the tension bars for best results.

Replacing your S-Series Stretcher Strip does not require any disassembly of the stretcher unit. To remove the damaged strip, rotate the handle downward until the extrusion aligns with the slot on the bottom of the stretcher arm. Slide the damaged strip out of the channel and replace with a new one. The 2 part strips may be replaced individually when damage occurs. You do not need to replace all three strips at one time.

- Remember to always make sure the strip is fully seated in the tension bar before applying any pressure.
- Do not release the stretcher handle until you have checked to make sure the bar has engaged.
- Sold in a pack of two 9" pieces.